Soft Quad-Fold Truck Bed Tonneau Cover for 2015-2024 Ford F-150 5.5FT Bed

Product Description and Package Include:

1. 1x Bed Cover
2. 1x Seal Strip
3. 4x Front Clamp
4. 4x T-bar
5. 4x Triangle Screw
6. 1x Light

Please confirm the model and year before ordering. Cab size doesn't matter as long as you have the right model and bed size.

This Soft Quad-Fold Truck Bed Tonneau Cover is compatible with 2015-2024 Ford F-150 5.5FT Bed, without system track.

Specification: - Style: Soft Quad-Fold - Size: 5.5FT - Finish: Black - Compatible with 2015-2024 Ford F-150 5.5FT Bed - Includes Seal Strip and LED Lamps

All Weather Protection: Protect your valuables against extreme weather conditions such as blistering sun, rainfall, hailing or snow.

Improved Fuel Economy: Saves gas, sleek design, reduces the drag caused by open truck beds. Increase fuel efficiency by more than 5%.

No Drill Installation: The product comes with a clamp type fixture and all necessary components, three adjustable clamp holes on both sides for precise mounting, installation takes only a few minutes, easy to assemble and disassemble.

Secure Locking: Sealed by Velcro strips on both sides, a latch and adjustable tension system at the tailgate keeps the cover tight and secure.

Increased Security: When the tailgate is closed, the latch locks the waterproof cover in place, and the lock will only open automatically when the tailgate is opened and the rope is pulled down, thus improving safety.

Installation Instructions: 1. Clean truck bed thoroughly before installation. 2. Stick the supplied front seal strip on the front bed rail by aligning with the outer edge. 3. Slide the two aluminum blocks at the front end to the most suitable position. 4. Clamp the T-bar on the aluminum slider of the first fold, use front clamps and triangle screw to install it on the T-bar to complete the first fold. 5. Slide the front clamp to the best position, clamp the interface under the metal bed rail, and then use the triangle screw to rotate into the metal rod to fix the entire clamp. 6. Open the bungee cord at the front end, fully unfold cover towards the tailgate and ensure cover aligns on all sides. 7. Adjust the connection position of the rear clamp and T-bar according to the actual situation, open the cover and place it on the lathe, and push the rear clamp vertically to fix it to the rails on both sides of the lathe. 8. After rear clamps have been latched securely, close/lock tailgate and cover cannot be opened from the outside.

product information: